airmajor油冷卻器AMOC-10G(T) AMOC-15G(T) AMOC-20G(T)

w. tank

General Oil Cooler

• AMOC-05G(T)
• AMOC-10G(T)
• AMOC-15G(T)
• AMOC-20G(T)
• AMOC-30G(T)
• AMOC-50G

AMOC-05G(T)

Type		Spec
Cooling capacity(W)		1530/1800
Power		3 phase AC 220V, 50/60Hz Using transber, 380/440V System is Available
Dimension(WxDxH)(mm)	w/o tank	365x446x670
		365x446x890
Compressor		3 phase, rotary, 800W
Evaporator		Shell & Coil, Plate Type optional
Condenser		Air-cooling, Fin Tube Type
FAN MOTER		?300, 80W x 1
Pump discharge rate (LPM)		12/14.4LPM/0.5Mpa
Refrigerant type		R - 410A
Use range(ambient temp.)		5 ~ 45?C (50?C  Option)
use range (oil temp.)		5 ~ 50?C (55?C  Option)
Max. pressure of oil		5 bar
Power capacity		4A/1.5KVA at 220V/60Hz
Circuit breaker capacity (A)		10

---

 
What is oil cooler?

AIRMAJOR oil cooler controls the temperature of heated oil when a machine is operated, prevents the thermal transbation of machine and maintains the viscosity of oil and lubrication characteristics, which improves the machining precision of machine tool and minimizes the defect and furthermore, helps the extension of service life.

Next Generation precision oil cooler system

 5 horsepower precision oil cooler line-up completed

5 horsepower precision oil cooler line-up completed 5 horsepower precision oil cooler developed (±1℃ unit precise control) 0.5~5 horsepower precision line-up completed

---

	Available to select various evaporator b according to pollution level Shell & Coil Type, Plate Type, Open Type Used in variety for experiment equipment, superprecise machine tool, precise cooler etc
	Shell & Coil Type (Self-development completed) · When chip/grounds exist a little · Machining center/press machine applied	Plate Type high pressure (pressure-resistant 10k, low temperature · When it is clean · Discharge machining machine/water chiller applied	Open Type (Evaporator cover open type) · When cleaning in open · Coolant system applied

---

3 phase compressor applied for all models 0.5 class/1.0 class ; operates smoothly by using a 3 phase compressor Authorized durability with low noise and low vibration Available to respond 380V/440V without transmitter  (Other maker uses a single compressor for 0.5 class/ 1.0 class which gives difficulties when operating and needs a transmitter.)

---

High perbance superprecise digital controller adopted Easy lamp to see and figures are displayed at the same time Refined touch panel with easy temperature control function Timer and alarm function in case of trouble

	Available to control precisely upto oil temperature of 50℃  Customized design for high temperature environment : Available to respond immediaby when ambient temperature is 50℃ (option) >> injection circuit applied As the oil temperature increases due to the increase of machining speed of machine tool, the use temperature is adjusted by 40~50℃ (lubricating oil, hydraulic operating oil etc) Realize the precise control up to the limit temperature by using the special cooling circuit (injection circuit) Customized design for high temperature area market (India, China, Vietnam) Affordable design of condenser to prepare for the pollution situation of machining factory
	What is injection circuit? A circuit that protects the compressor by controlling separate electronic expansion valve for the stable operation of cooling system in high temperature environment of ambient temperature 40~50℃

---

Eco-friendly refrigerant : R-410A ?uses eco-friendly new refrigerant with low Ozone destruction index for all models (R-410A)