產(chǎn)品詳情
| Type | AMD-30T | AMD-60T |
|---|---|---|
| Dehumidification capacity | 30cc/h (30?C 80%) | 60cc/h (30?C 80%) |
| Rated power consumption | 60W | 130W |
| Dimension(WxHxD)(mm) | 128x300x116 | 128x380x116 |
| Weight / Noise | 3.5kg / 38dB | 4.5kg / 48dB |
| Input power | 1Ph 220V, 50/60Hz | |
| Use range | RH 20~90% | |
| Use temperature range | 0 ~ 60?C | |
| Attachment b | Side attachment type | |
Condensate water dryer
| Type | AWD-15 | AWD-25 |
|---|---|---|
| Max. evaporation capacity | 0.5?/H | 1.0?/H |
| Rated power consumption | 500W | 1,000W |
| Dimension(WxHxD)(mm) | 188x162x117 | 333x217x122 |
| Weight | 2kg | 4.1kg |
| Input power | 1Ph 220V, 50/60Hz | |
| Use range | RH 20~90% | |
| Use temperature range | 0 ~ 60?C | |
Heater
| Type | ASH-B40 |
|---|---|
| Input power | 1?, 220V, 50Hz(only)/60Hz(only) |
| Dimension (WxHxD)(mm) | 120x400x120 |
| Rated power consumption | 400W |
Features
What is electronic dehumidifer?
The electronic dehumidifier of AIRMAJOR is a dehumidifier of semiconductor element using a TEM (Thermo-Electric Module). TEM cooling element is installed between the double-attached bl plates and the air is connected to the bl plate that becomes cooled when a DC is applied, and the moisture in the air becomes dewing which generates a water drop. The generated water drop is discharged outside through drain tube below bl plate and the absorbed air passes through the gradually heating bl plate and is discharged outside in the dried state. When this process continues, the water contents indoor becomes lower which reduces the humidity.
Features of electronic dehumidifer of AIRMAJOR
- Strong dehumidification with small power consumption by applying TEM semiconductor element using a Peltier effect
- Control system bded by Micom can control and maintain the humidity correctly regardless of the change of temperature
- Easy to install just by connecting the power and drain hose
- The dehumidifer has two buttons for Auto (Automatic control b) and Cont (Continuous operation) so that user can select for any use.
Basic principle and Block Diagram
The electronic dehumidifer of AIRMAJOR uses heat pumping effect (Peltier effect) of conductive cooling semiconductor element. The internal element becomes N type and P type according to the compound of Be2Te3 (Bismusbelium) and N type semiconductor and P type semiconductor is connected that bl (CU) is connected and adhered. * Heat pumping: A phenomenon that each carrier moves the thermal energy by applying the DC voltage to the adhesive structure of N type and P type.
