產品詳情
泥漿脫水振動篩是一種專業將含水量大的細沙、泥漿、泥沙、水洗砂、精煤、洗煤廠的濕煤等物料脫水快干的設備，廠家用上好的材質（錳鋼、碳鋼、不銹鋼）精上的電焊工藝制造的耐用耐磨直線脫水篩機!
產品特點：
1、采用自同步原理，電機通過胎式聯軸器驅動振動器，結構簡單，工作噪聲低。工作頻率高、振動強度大、篩上產品水分低、單位處理能力高，當用于尾礦脫水時能得到較高的固體回收率。
2、為了適應不同尾礦性質差別，本篩振幅可調，方法是調整主副偏心塊夾角，從而滿足不同性質尾礦的脫水效果。預脫水篩板篩面與水平成45度安裝，脫水篩板負傾角安裝，增加脫水面積并促使物料盡快脫水形成濾層。
3、為方便對篩面進行維護和更換，篩面采用軌座式安裝。采用聚氨酯彈性篩面，高的開孔率和彈性，有利于脫水。篩面?zhèn)葔喊寰捎镁郯滨ゲ牧希瑝勖L，篩面固定可靠，并能有效保護篩框側板不受物料沖刷。
4、側板與橫梁聯接采用扭剪型高強螺栓，沒有焊縫，避免了因焊接應力造成的側板開裂問題。
6、振動器為塊偏心單元體結構，拆卸維護方便。軸承采用振動設備軸承，避免軸承發熱過早損壞。
7、主要焊接結構件均采用表面處理，外形美觀下梁表面涂有防磨損涂層，防止橫梁過早磨損而斷裂。采用鋼制螺旋彈簧減振，較大限度的降低篩機對基礎的動負荷。
8、采用有限元結構分析軟件，保證篩框的強度、剛度和受力合理，而且重量輕，能耗小。
9、用戶根據需要可配有帶底架和給料箱的結構，方便安裝與調試。
Mud dehydration vibration sieve is a kind of professional water content of fine sand, sand, mud, sediment, water washing sand, cleaned coal, coal washing plant wet coal and other materials dehydration fast drying equipment, manufacturers with good material (manganese steel, carbon steel, stainless steel) fine welding process manufacturing of durable wear-resistant linear dehydration sieve machine!
Product features:
1. Using the principle of self-synchronization, the motor drives the vibrator through the tire coupling, with simple structure and low working noise. High working frequency, high vibration strength, low product moisture on the sieve, high unit treatment capacity, and high solid recovery rate can be obtained when used for tailings dehydration.
2. In order to adapt to the differences of different tailings properties, the sieve amplitude can be adjusted to adjust the angle of the main and secondary eccentric block to meet the dehydration effect of tailings of different properties. The sieve surface is installed at 45 degrees horizontally, and the dehydration sieve plate is installed at a negative inclination Angle to increase the dehydration area and promote the material to be dehydrated as soon as possible to b a filter layer.
3. In order to facilitate the maintenance and replacement of the screen surface, the screen is installed in rail type. Using polyurethane elastic sieve surface, high pore opening rate and elasticity, conducive to dehydration. The screen surface side pressure plate is made of polyurethane material, long life, reliable screening surface fixation, and can effectively protect the screen frame side plate from material scour.
4. Torsional-shear high-strength bolts are used to connect the side plate with the cross beam, with no weld joints, which avoids the cracking problem of the side plate caused by welding stress.
6. The vibrator is a block eccentric unit body structure, which is easy for disassembly and maintenance. Bearing adopts vibration equipment bearing to avoid premature damage.
7. The main welded structural parts are all treated with surface treatment, and the beautiful appearance of the surface of the lower beam is coated with anti-wear coating to prevent the premature wear and breaking of the beam. The steel spiral spring is used to reduce the dynamic load of the sieve to the foundation.
8. Use the finite element structure analysis software to ensure the reasonable strength, stiffness and stress of the sieve frame, and the light weight and small energy consumption.
9. Users can be equipped with structures with bottom frame and feed box as needed to facilitate installation and debugging.
