首頁 >產品 >橡塑 > 橡膠制品> 塑膠配件>山東豪沃橡塑有限公司

豪沃橡塑超高分子量聚乙烯泵軸套

數量(千克)	價格
1	22.00元/千克

最小起訂： 1千克
發貨地址：山東德州市
發布日期：2022-05-07
訪問量：407

咨詢電話：158-0685-1017

打電話時請告知是在機電之家網上看到獲取更多優惠。謝謝！

立即詢價立即拿樣

山東豪沃橡塑有限公司

實名認證企業認證

聯系人：劉經理
手機：15806851017
電話：-

營業執照：已審核
經營模式：生產加工-個體工商戶
所在地區：山東德州市
家家通積分：3883分

進入旺鋪手機旺鋪

詳細參數
品牌	其他	型號	定制
材質	PE	加工定制	是
執行標準	國標	使用形式	其他
拉伸強度	45kg	缺口沖擊強度	69kg.cm
斷裂伸長率	0.56%	吸水率	0.01%
顏色	其他	產地	山東

產品詳情

山東豪沃橡塑板高分子量聚乙烯軸套

超高分子量聚乙烯(UHMW-PE）是一種線型結構的具有優異綜合性能的熱塑性工程塑料。其發展十分迅速，80年代以前，世界平均年增長率為8.5%，進入80年代以后，增長本高達15%~20%。而我國的平均年增長率在30%人上。1978年世界消耗量為12，000~12，500，而到1990年世界需求量約5萬噸，其中美國占70%。2007-2009年中國逐步成為世界工程塑料工廠，超分子量聚乙烯產業發展更是十分迅速，以下為發展。

上世紀30年代最早有人提出關于超高分子量聚乙烯纖維的基礎理論;凝膠紡絲法和增塑紡絲法的出現使超高分子量聚乙烯在技術上取得重大突破上世紀70年代，英國利然大學的Capacero和vard首先研制成功分子量為10萬的高分子量聚乙烯纖維，1964年中國研制成功并投入工業生產1975年荷蘭利用十氫茶做溶劑發明了;深膠紡之法，成功制備出了 UHMWPE纖維，并于1979年申請了專利。此后經過十年的努力研究，江實超膠行絲志是南造高強聚乙烯纖維的有效方法，具有工業化前途1983年日本采用凝膠擠壓超倍拉伸法，以石蠟作溶劑，生產超高分子量聚乙烯纖維；
在中國超高分子量聚乙烯管材在2001年被(2000)056號文件列為國家科技成果重點推廣計劃，尾化工類新材科、新產品。國家計委將超高分子量聚乙烯管材列為當前優先發展的高科技產業重點領域項目。

超高分子量聚乙烯PE板材的性能特征:

1.極其堅韌耐用

2.低摩擦

3.優異的耐磨性

4.良好的耐化學性

5.低吸濕性

6.易于制造 UHMW PE工程塑料薄板

Shandong Haowo Rubber Board High Molecular Weight Polyethylene Shaft Sleeve Ultra-high molecular weight polyethylene (UHMW-PE) is a linear thermoplastic engineering plastic with excellent comprehensive properties. Its development is very rapid. Before the 1980s, the average annual growth rate in the world was 8.5%. After the 1980s, the growth cost was as high as 15%~20%. And the average annual growth rate in China is over 30%. In 1978, the world consumption was 12,000 ~ 12,500, but by 1990, the world demand was about 50,000 tons, of which the United States accounted for 70%. From 2007 to 2009, China gradually became the world's engineering plastics factory, and the ultra-molecular weight polyethylene industry developed very rapidly. The following are the developments.

The basic theory of UHMWPE fiber was first put forward in 1930s. The appearance of gel spinning and plasticizing spinning has made a great breakthrough in the technology of ultra-high molecular weight polyethylene. In 1970s, Capacero and vard of the University of Leeran in the UK first successfully developed high molecular weight polyethylene fiber with a molecular weight of 100,000. In 1964, China successfully developed it and put it into industrial production. In 1975, Holland invented it by using decahydrous tea as solvent. UHMWPE fiber was successfully prepared by deep spinning, and applied for a patent in 1979. After ten years of hard research, Jiangshi super-glue spinning is an effective b to produce high-strength polyethylene fiber in South China, which has the prospect of industrialization. In 1983, Japan adopted gel extrusion super-stretching b and paraffin as solvent to produce ultra-high molecular weight polyethylene fiber. In China, ultra-high molecular weight polyethylene pipe was listed as the national key promotion plan of scientific and technological achievements in 2001 by the Ministry of Science and Technology (Guoke Jizi (2000) No.056 document), and it was the end of new chemical materials and new products. The Ministry of Science and Technology of the State Planning Commission has listed UHMWPE pipe as a priority project of high-tech industry.

Perbance characteristics of ultra-high molecular weight polyethylene PE sheet;

1. Extremely tough and durable

2. Low friction 3. Excellent wear resistance

4. Good chemical resistance

5. Low hygroscopicity

6. Easy to manufacture UHMW PE engineering plastic sheet